NexGen Ultra Slim Graphite Heating System Can be Installed Underfloor - Wall - Ceiling
The Low Voltage Heating Film Using Graphite Nano Technology. For Safe , Healthy , Efficient and Flexible Heating
24 Volt Infrared Electric Heating The Future of Heating – Also Compatible with Solar PV, Wind and Battery Solutions for Heated Walls Heated Floors and Ceilings. Safe Low Voltage for maximum heating and cost-efficiency Manufactured in the UK
Nexgen is a low voltage heating solution. Here’s why
Voltage Squared divided by resistance equals power which is measured in Watts. Most Carbon Film or Heating Cables are around 60 to 80 ohms resistance across a 60 cm sheet. Nexgen is on average just between 4 and 12 ohms ! Resistance is exactly as it sounds to stop or resist flow from one thing to another. In this instance we are using heat.
NOW YOU UNDERSTAND WHY OTHER FAR INFRARED PRODUCTS , INCLUDING PANELS , HAVE TO HAVE A 240 VOLT SUPPLY
Also Nexgen covers 95% of the area with its patented graphite mix. In comparison FAR Infrared and Wire Mats cover 2% to 4% and Carbon Film around 60% coverage. A Infra Red Panel is also on average 2%.
Because of this Nexgen saves between 15% to 24% in running costs AND gives a constant consistent temperature.
NexGen’s benefits are Immediate
- It is the flexible,The Future of Heating
- The Low Cost, High Energy heating solution
- Providing Low Voltage Heating from 12 volt to 48 volt,dependent on application, DC or AC
- With a Healthy Heat – Far Infrared Rays (FIR)
- Providing incredibly rapid warm up times
- Simple insulation
- Renewable energy solution – using heat from Solar Panels
- Zone each room – for maximum heating cost efficiency
- NexGen is owned and manufactured in the UK
EASY AND CHEAP TO INSTALL
Installing an NexGen in your home or office is nothing short of a breeze. There is no pipework or wiring required. In addition, infrared heating panels are based on a simple and robust technology – there are no moving parts and there is virtually no maintenance whatsoever, compared to a regular boiler system, which it might be noted requires (at the minimum) an annual gas inspection, if your space is being rented out.
NexGen Ultra Slim Graphite Heating System Installed - Underfloor
NexGen Ultra Slim Graphite Heating System Installed - Wall
NexGen Ultra Slim Graphite Heating System Installed - Ceiling
AVERAGE SAVINGS
BETWEEN CONVENTIONAL AND INFRARED HEATING
Let’s consider this carefully for a moment – power (kWh), costs 12p per unit, while mains gas costs 4p per unit. It may be easy to simply go with these numbers and give a badge of honour to mains gas as being a highly economical solution; however, the comparison (and benefits) must be understood at length.
How is comfortable room temperature maintained ? For those using a regular gas heating system, the thermostat is typically set around 20 degrees C, which is what the ambient temperature would need to be in order for the occupant to feel reasonably warm. Since infrared heating systems heat up solid objects, including the occupant as our bodies attract infrared rays, the ambient air temperature is entirely irrelevant – it could be well below zero but the occupant would still feel more than adequately warm due to the far infrared rays.
This inevitably means that even if you set the thermostat on your infrared heating system significantly lower than 20 degrees C, you would still feel comfortably warm. At the end of the day, you are looking at marked energy savings. Please see below for more savings.
NexGen is a new, unique radiant heating technology that provides extremely efficient low cost, high-energy, warming a room using radiant Far Infrared rather than conventional gas radiators or electric heaters.
Our infrared heating system controls use innovative wireless technology to activate or deactivate your infrared heaters.
Traditional convection heating systems heat up the entire air in your living or working space, at which point warm air disperses uncontrollably. Your central heating system ends up heating the entire volume of air in the house or building, because you simply cannot control where the heated air travels
Effective zoning can be achieved when you selectively heat up areas of your home/office through smart and stylish thermostatic controls. Our temperature control panels can be linked together to heat up zones individually. Invest in our true next-gen infrared heating systems today and save yourself a tonne of energy and heating costs.
Our controls are very easy to use and can be programmed to wirelessly work with your NexGen Heating film. Have complete control over your infrared heating panels at the touch of a few buttons. This is the future of heating, this is NexGen Heating.
